AI助手支持GPT4.0
This is the long description.
这是详细的描述。
No limit, and you can use Markdown (as well as in the following sections).
没有限制,您可以使用Markdown(以及下面的部分)。 p>
For backwards compatibility, if this section is missing, the full length of the short description will be used, and
为了向后兼容,如果缺少此部分,将使用简短说明的完整长度,并且
Markdown parsed.
Markdown已解析。 p>
A few notes about the sections above:
关于以上部分的几点说明: p>
Note that it might work on
请注意,它可能适用于
higher versions… this is just the highest one you’ve verified.
更高的版本...这只是您已验证的最高版本。 li>
Stable tag should indicate the Subversion “tag” of the latest stable version, or “trunk,” if you use /trunk/ for
/trunk/
如果您对使用 / trunk / code>,Stable标记应指示最新稳定版本的Subversion“标记”或“ trunk”stable.稳定。 p>Note that the readme.txt of the stable tag is the one that is considered the defining one for the plugin, so请注意,稳定标签的 readme.txt code>是被认为是插件定义之一的标签,因此if the /trunkeadme.txt file says that the stable tag is 4.3, then it is /tags/4.3eadme.txt that如果 /trunkeadme.txt code>文件说稳定标签是 4.3 code>,则 /tags/4.3eadme.txt code>'ll be used将被使用for displaying information about the plugin.用于显示有关插件的信息。In this situation, the only thing considered from the trunk readme.txt在这种情况下,唯一考虑的是主干 readme.txt code> is the stable tag pointer.是稳定的标记指针。Thus, if you develop in trunk, you can update the trunk readme.txt to reflect changes in因此,如果您在主干中进行开发,则可以更新主干 readme.txt code>以反映中的更改your in-development version, without having that information incorrectly disclosed about the current stable version您的开发中版本,而不会错误地披露有关当前稳定版本的信息that lacks those changes — as long as the trunk’s readme.txt points to the correct stable tag.缺少这些更改-只要中继线的 readme.txt code>指向正确的稳定标签即可。 p>If no stable tag is provided, it is assumed that trunk is stable, but you should specify “trunk” if that’s where如果未提供稳定标签,则认为中继线是稳定的,但如果在此处,则应指定“ trunk” you put the stable version, in order to eliminate any doubt.您放置了稳定版本,以便消除任何疑问。 p>
/ trunk / code>,Stable标记应指示最新稳定版本的Subversion“标记”或“ trunk”stable.稳定。 p>Note that the readme.txt of the stable tag is the one that is considered the defining one for the plugin, so请注意,稳定标签的 readme.txt code>是被认为是插件定义之一的标签,因此if the /trunkeadme.txt file says that the stable tag is 4.3, then it is /tags/4.3eadme.txt that如果 /trunkeadme.txt code>文件说稳定标签是 4.3 code>,则 /tags/4.3eadme.txt code>'ll be used将被使用for displaying information about the plugin.用于显示有关插件的信息。In this situation, the only thing considered from the trunk readme.txt在这种情况下,唯一考虑的是主干 readme.txt code> is the stable tag pointer.是稳定的标记指针。Thus, if you develop in trunk, you can update the trunk readme.txt to reflect changes in因此,如果您在主干中进行开发,则可以更新主干 readme.txt code>以反映中的更改your in-development version, without having that information incorrectly disclosed about the current stable version您的开发中版本,而不会错误地披露有关当前稳定版本的信息that lacks those changes — as long as the trunk’s readme.txt points to the correct stable tag.缺少这些更改-只要中继线的 readme.txt code>指向正确的稳定标签即可。 p>If no stable tag is provided, it is assumed that trunk is stable, but you should specify “trunk” if that’s where如果未提供稳定标签,则认为中继线是稳定的,但如果在此处,则应指定“ trunk” you put the stable version, in order to eliminate any doubt.您放置了稳定版本,以便消除任何疑问。 p>
stable.
稳定。 p>
Note that the readme.txt of the stable tag is the one that is considered the defining one for the plugin, so
readme.txt
请注意,稳定标签的 readme.txt code>是被认为是插件定义之一的标签,因此if the /trunkeadme.txt file says that the stable tag is 4.3, then it is /tags/4.3eadme.txt that如果 /trunkeadme.txt code>文件说稳定标签是 4.3 code>,则 /tags/4.3eadme.txt code>'ll be used将被使用for displaying information about the plugin.用于显示有关插件的信息。In this situation, the only thing considered from the trunk readme.txt在这种情况下,唯一考虑的是主干 readme.txt code> is the stable tag pointer.是稳定的标记指针。Thus, if you develop in trunk, you can update the trunk readme.txt to reflect changes in因此,如果您在主干中进行开发,则可以更新主干 readme.txt code>以反映中的更改your in-development version, without having that information incorrectly disclosed about the current stable version您的开发中版本,而不会错误地披露有关当前稳定版本的信息that lacks those changes — as long as the trunk’s readme.txt points to the correct stable tag.缺少这些更改-只要中继线的 readme.txt code>指向正确的稳定标签即可。 p>If no stable tag is provided, it is assumed that trunk is stable, but you should specify “trunk” if that’s where如果未提供稳定标签,则认为中继线是稳定的,但如果在此处,则应指定“ trunk” you put the stable version, in order to eliminate any doubt.您放置了稳定版本,以便消除任何疑问。 p>
readme.txt code>是被认为是插件定义之一的标签,因此if the /trunkeadme.txt file says that the stable tag is 4.3, then it is /tags/4.3eadme.txt that如果 /trunkeadme.txt code>文件说稳定标签是 4.3 code>,则 /tags/4.3eadme.txt code>'ll be used将被使用for displaying information about the plugin.用于显示有关插件的信息。In this situation, the only thing considered from the trunk readme.txt在这种情况下,唯一考虑的是主干 readme.txt code> is the stable tag pointer.是稳定的标记指针。Thus, if you develop in trunk, you can update the trunk readme.txt to reflect changes in因此,如果您在主干中进行开发,则可以更新主干 readme.txt code>以反映中的更改your in-development version, without having that information incorrectly disclosed about the current stable version您的开发中版本,而不会错误地披露有关当前稳定版本的信息that lacks those changes — as long as the trunk’s readme.txt points to the correct stable tag.缺少这些更改-只要中继线的 readme.txt code>指向正确的稳定标签即可。 p>If no stable tag is provided, it is assumed that trunk is stable, but you should specify “trunk” if that’s where如果未提供稳定标签,则认为中继线是稳定的,但如果在此处,则应指定“ trunk” you put the stable version, in order to eliminate any doubt.您放置了稳定版本,以便消除任何疑问。 p>
if the /trunkeadme.txt file says that the stable tag is 4.3, then it is /tags/4.3eadme.txt that
/trunkeadme.txt
4.3
/tags/4.3eadme.txt
如果 /trunkeadme.txt code>文件说稳定标签是 4.3 code>,则 /tags/4.3eadme.txt code>'ll be used将被使用for displaying information about the plugin.用于显示有关插件的信息。In this situation, the only thing considered from the trunk readme.txt在这种情况下,唯一考虑的是主干 readme.txt code> is the stable tag pointer.是稳定的标记指针。Thus, if you develop in trunk, you can update the trunk readme.txt to reflect changes in因此,如果您在主干中进行开发,则可以更新主干 readme.txt code>以反映中的更改your in-development version, without having that information incorrectly disclosed about the current stable version您的开发中版本,而不会错误地披露有关当前稳定版本的信息that lacks those changes — as long as the trunk’s readme.txt points to the correct stable tag.缺少这些更改-只要中继线的 readme.txt code>指向正确的稳定标签即可。 p>If no stable tag is provided, it is assumed that trunk is stable, but you should specify “trunk” if that’s where如果未提供稳定标签,则认为中继线是稳定的,但如果在此处,则应指定“ trunk” you put the stable version, in order to eliminate any doubt.您放置了稳定版本,以便消除任何疑问。 p>
/trunkeadme.txt code>文件说稳定标签是 4.3 code>,则 /tags/4.3eadme.txt code>'ll be used将被使用for displaying information about the plugin.用于显示有关插件的信息。In this situation, the only thing considered from the trunk readme.txt在这种情况下,唯一考虑的是主干 readme.txt code> is the stable tag pointer.是稳定的标记指针。Thus, if you develop in trunk, you can update the trunk readme.txt to reflect changes in因此,如果您在主干中进行开发,则可以更新主干 readme.txt code>以反映中的更改your in-development version, without having that information incorrectly disclosed about the current stable version您的开发中版本,而不会错误地披露有关当前稳定版本的信息that lacks those changes — as long as the trunk’s readme.txt points to the correct stable tag.缺少这些更改-只要中继线的 readme.txt code>指向正确的稳定标签即可。 p>If no stable tag is provided, it is assumed that trunk is stable, but you should specify “trunk” if that’s where如果未提供稳定标签,则认为中继线是稳定的,但如果在此处,则应指定“ trunk” you put the stable version, in order to eliminate any doubt.您放置了稳定版本,以便消除任何疑问。 p>
4.3 code>,则 /tags/4.3eadme.txt code>'ll be used将被使用for displaying information about the plugin.用于显示有关插件的信息。In this situation, the only thing considered from the trunk readme.txt在这种情况下,唯一考虑的是主干 readme.txt code> is the stable tag pointer.是稳定的标记指针。Thus, if you develop in trunk, you can update the trunk readme.txt to reflect changes in因此,如果您在主干中进行开发,则可以更新主干 readme.txt code>以反映中的更改your in-development version, without having that information incorrectly disclosed about the current stable version您的开发中版本,而不会错误地披露有关当前稳定版本的信息that lacks those changes — as long as the trunk’s readme.txt points to the correct stable tag.缺少这些更改-只要中继线的 readme.txt code>指向正确的稳定标签即可。 p>If no stable tag is provided, it is assumed that trunk is stable, but you should specify “trunk” if that’s where如果未提供稳定标签,则认为中继线是稳定的,但如果在此处,则应指定“ trunk” you put the stable version, in order to eliminate any doubt.您放置了稳定版本,以便消除任何疑问。 p>
/tags/4.3eadme.txt code>'ll be used将被使用for displaying information about the plugin.用于显示有关插件的信息。In this situation, the only thing considered from the trunk readme.txt在这种情况下,唯一考虑的是主干 readme.txt code> is the stable tag pointer.是稳定的标记指针。Thus, if you develop in trunk, you can update the trunk readme.txt to reflect changes in因此,如果您在主干中进行开发,则可以更新主干 readme.txt code>以反映中的更改your in-development version, without having that information incorrectly disclosed about the current stable version您的开发中版本,而不会错误地披露有关当前稳定版本的信息that lacks those changes — as long as the trunk’s readme.txt points to the correct stable tag.缺少这些更改-只要中继线的 readme.txt code>指向正确的稳定标签即可。 p>If no stable tag is provided, it is assumed that trunk is stable, but you should specify “trunk” if that’s where如果未提供稳定标签,则认为中继线是稳定的,但如果在此处,则应指定“ trunk” you put the stable version, in order to eliminate any doubt.您放置了稳定版本,以便消除任何疑问。 p>
'll be used
将被使用
for displaying information about the plugin.
用于显示有关插件的信息。
In this situation, the only thing considered from the trunk readme.txt
在这种情况下,唯一考虑的是主干 readme.txt code> is the stable tag pointer.是稳定的标记指针。Thus, if you develop in trunk, you can update the trunk readme.txt to reflect changes in因此,如果您在主干中进行开发,则可以更新主干 readme.txt code>以反映中的更改your in-development version, without having that information incorrectly disclosed about the current stable version您的开发中版本,而不会错误地披露有关当前稳定版本的信息that lacks those changes — as long as the trunk’s readme.txt points to the correct stable tag.缺少这些更改-只要中继线的 readme.txt code>指向正确的稳定标签即可。 p>If no stable tag is provided, it is assumed that trunk is stable, but you should specify “trunk” if that’s where如果未提供稳定标签,则认为中继线是稳定的,但如果在此处,则应指定“ trunk” you put the stable version, in order to eliminate any doubt.您放置了稳定版本,以便消除任何疑问。 p>
readme.txt code> is the stable tag pointer.是稳定的标记指针。Thus, if you develop in trunk, you can update the trunk readme.txt to reflect changes in因此,如果您在主干中进行开发,则可以更新主干 readme.txt code>以反映中的更改your in-development version, without having that information incorrectly disclosed about the current stable version您的开发中版本,而不会错误地披露有关当前稳定版本的信息that lacks those changes — as long as the trunk’s readme.txt points to the correct stable tag.缺少这些更改-只要中继线的 readme.txt code>指向正确的稳定标签即可。 p>If no stable tag is provided, it is assumed that trunk is stable, but you should specify “trunk” if that’s where如果未提供稳定标签,则认为中继线是稳定的,但如果在此处,则应指定“ trunk” you put the stable version, in order to eliminate any doubt.您放置了稳定版本,以便消除任何疑问。 p>
is the stable tag pointer.
是稳定的标记指针。
Thus, if you develop in trunk, you can update the trunk readme.txt to reflect changes in
因此,如果您在主干中进行开发,则可以更新主干 readme.txt code>以反映中的更改your in-development version, without having that information incorrectly disclosed about the current stable version您的开发中版本,而不会错误地披露有关当前稳定版本的信息that lacks those changes — as long as the trunk’s readme.txt points to the correct stable tag.缺少这些更改-只要中继线的 readme.txt code>指向正确的稳定标签即可。 p>If no stable tag is provided, it is assumed that trunk is stable, but you should specify “trunk” if that’s where如果未提供稳定标签,则认为中继线是稳定的,但如果在此处,则应指定“ trunk” you put the stable version, in order to eliminate any doubt.您放置了稳定版本,以便消除任何疑问。 p>
readme.txt code>以反映中的更改your in-development version, without having that information incorrectly disclosed about the current stable version您的开发中版本,而不会错误地披露有关当前稳定版本的信息that lacks those changes — as long as the trunk’s readme.txt points to the correct stable tag.缺少这些更改-只要中继线的 readme.txt code>指向正确的稳定标签即可。 p>If no stable tag is provided, it is assumed that trunk is stable, but you should specify “trunk” if that’s where如果未提供稳定标签,则认为中继线是稳定的,但如果在此处,则应指定“ trunk” you put the stable version, in order to eliminate any doubt.您放置了稳定版本,以便消除任何疑问。 p>
your in-development version, without having that information incorrectly disclosed about the current stable version
您的开发中版本,而不会错误地披露有关当前稳定版本的信息
that lacks those changes — as long as the trunk’s readme.txt points to the correct stable tag.
缺少这些更改-只要中继线的 readme.txt code>指向正确的稳定标签即可。 p>If no stable tag is provided, it is assumed that trunk is stable, but you should specify “trunk” if that’s where如果未提供稳定标签,则认为中继线是稳定的,但如果在此处,则应指定“ trunk” you put the stable version, in order to eliminate any doubt.您放置了稳定版本,以便消除任何疑问。 p>
readme.txt code>指向正确的稳定标签即可。 p>If no stable tag is provided, it is assumed that trunk is stable, but you should specify “trunk” if that’s where如果未提供稳定标签,则认为中继线是稳定的,但如果在此处,则应指定“ trunk” you put the stable version, in order to eliminate any doubt.您放置了稳定版本,以便消除任何疑问。 p>
If no stable tag is provided, it is assumed that trunk is stable, but you should specify “trunk” if that’s where
如果未提供稳定标签,则认为中继线是稳定的,但如果在此处,则应指定“ trunk”
you put the stable version, in order to eliminate any doubt.
您放置了稳定版本,以便消除任何疑问。 p>
li>
ul>
You may provide arbitrary sections, in the same format as the ones above.
您可以提供与上述格式相同的任意部分。
This may be of use for extremely complicated
这可能适用于极其复杂的
plugins where more information needs to be conveyed that doesn’t fit into the categories of “description” or
需要传达更多信息的插件,这些信息不属于“描述”或类别
“installation.”
“安装。”
Arbitrary sections will be shown below the built-in sections outlined above.
任意部分将显示在上面概述的内置部分下面。 p>
Ordered list:
订购清单: p>
ol>
Unordered list:
无序列表: p>
Here's a link to WordPress and one to WordPress 的链接,也是
projects/markdown/syntax" title="Markdown is what the parser uses to process much of the readme file" rel="nofollow">Markdown's Syntax Documentation.
projects / markdown / syntax“ title =” Markdown是解析器用来处理许多自述文件的内容“ rel =” nofollow“> Markdown的语法文档。
Titles are optional, naturally.
标题自然是可选的。 p>
Markdown uses email style notation for blockquotes and I’ve been told:
Markdown对块引用使用电子邮件样式符号,并被告知:
> Asterisks for emphasis.
> 强调 em>的星号。Double it up for strong.将其加倍以得到 strong strong>。 p><?php code(); &lt;?php code(); // goes in backticks ?>//放在反引号中?&gt; code> pre>
Double it up for strong.
将其加倍以得到 strong strong>。 p><?php code(); &lt;?php code(); // goes in backticks ?>//放在反引号中?&gt; code> pre>
<?php code(); &lt;?php code(); // goes in backticks ?>//放在反引号中?&gt; code> pre>
&lt;?php code(); // goes in backticks ?>//放在反引号中?&gt;
// goes in backticks ?>
//放在反引号中?&gt;
code> pre>
This section describes how to install the plugin and get it working.
本节介绍如何安装插件并使其正常工作。 p>
e.g.
例如 p>
plugin-name.php
/wp-content/plugins/
plugin-name.php code>上载到 / wp-content / plugins / code>目录 li>Activate the plugin through the ‘Plugins’ menu in WordPress通过WordPress中的“插件”菜单激活插件 li>Place <?php do_action('plugin_name_hook');放置&lt;?php do_action('plugin_name_hook'); ?> in your templates?&gt; code>在您的模板中 li>
/ wp-content / plugins / code>目录 li>Activate the plugin through the ‘Plugins’ menu in WordPress通过WordPress中的“插件”菜单激活插件 li>Place <?php do_action('plugin_name_hook');放置&lt;?php do_action('plugin_name_hook'); ?> in your templates?&gt; code>在您的模板中 li>
<?php do_action('plugin_name_hook');放置&lt;?php do_action('plugin_name_hook'); ?> in your templates?&gt; code>在您的模板中 li>
&lt;?php do_action('plugin_name_hook'); ?>
?>
?&gt; code>在您的模板中 li>
原文出处:http://www.sanshu.cn/a/6107.html
群主管理都是支付大佬